NFA E315D steel plate/sheet,NFA36-231 E315D steel plate/sheet, under NFA standard, we can regard E315D steel plate/sheet for high yield strength cold forming steels.
E315D steel plate is a technical delivery conditions for high yield strength cold forming steels.It is according to NFA36-231 standard.we can regard E315D steel plates/sheets are low-perlite steel grades offer excellent bending, flanging, cold-bordering and folding properties in both longitudinal and transverse direction. The bending radii specified below should be observed as minimum values.
| E315D NFA36-231 MATERIAL#1.092 | Comparison of steel grades | |
| SEW 092 | - | |
| EN10149-2 | S315MC | |
| BS 1449 Sec. 1.4 | HR 43F35 | |
| Salzgitter Flachstahl - | PSQ 32 | |
| FK | B | |
| Chemical analysis -% by mass* | C | Si | Mn | P | S 1) | Altotal | Mo | Ti | B |
| max. | max. | max. | max. | max. | min. | max. | max. | max. | |
| 0,12 | 0,50 | 1,30 | 0,025 | 0,020 | 0,015 | - | 0,15 | - |
E315D steel Mechanical properties
| Mechanical properties |
Yield Strength ReH [N/mm2] transv.min. |
Tensile Strength Rm [N/mm2] transv. |
Min.totalelongation [%] | Smallest recommended bending radius bending angles ≤ 90 |
|||
| E315D | 315 | 390 - 510 | L0 = 80 mm | L0= 5,65 √S0 | e1) ≤ 3 | 3 < e1)< 6 | e1) > 6 |
| e2) < 3 | e2) ≥ 3 | 0,25 e | 0,5 e | 1,0 e | |||
| 20 | 24 | ||||||
we are E315D steel suppliers ,also can supply E355D steel,E420D steel,E455D steel,please contact us if you need.
Just like you, 70% customers choose long-term cooperation with BBN steel not only for our good product and service quality, good reputation in the international market, but also for our experienced one-stop raw material supply and further steel processing!
