EN10149 S315NC steel plate/sheet,EN10149 S315NC steel plate/sheet, under EN standard, we can regard S315NC steel plate/sheet as high strength steels for cold-forming, normalised steel.
EN10149 S315NC is mainly used as high strength steels for cold-forming,normalised steels.The EN10149 S315NC steel grade is used for cold-formed components of the most varied designs.The applications include the manufacture of Longitudinal beams,Frames,Cold-pressed parts Cold-rolled sections and Structural pipes and so on.
| S315NC EN 10149-3 Number:1.0973 |
Comparision of steel grades | |
| DIN | QStE300N | |
| BS 4360 | - | |
| ASTM | - | |
EN S315NC steel Chemical Composition
| Grade | C max |
Si max |
Mn max |
P max |
S max |
AL max |
Nb max |
V max |
Ti max |
| S315NC | 0.16 | 0.50 | 1.4 | 0.025 | 0.02 | 0.015 | 0.09 | 0.1 | 0.15 |
EN S315NC steel Mechnical Properties
| Nominal thickness(mm) | - |
| ReH-Minimun yield strength(Mpa) | 315 |
| Nominal thickness(mm) | - |
| Rm-Tensile strength(Mpa) | 430-550 |
| Nominal thickness(mm) | From3 |
| A-Minimum elongation Lo=5,65√So(%) | 27 |
| Nominal thickness(mm) | to3 |
| A-Minimum elongation Lo=Lo=80mm(%) | 22 |
The sum of Nb, V and Ti shall be max 0.22% ;If agreed at the time of the enquiry and order, the sulfur content shall be max 0.01 % (ladle analysis).If sufficient N-binding elements are present ,the minimum total Al content does not apply.
S315NC is mainly used for various cold work tools and dies,such as cold punch,cold shear etc.
we also can supply S260NC,S355NC,S420N,S420NL,please contact us if you need.
Just like you, 70% customers choose long-term cooperation with BBN steel not only for our good product and service quality, good reputation in the international market, but also for our experienced one-stop raw material supply and further steel processing!
