S350GD+Z is strong enough for roofing and cladding applications. This structural steel grade offers a minimum yield strength of 350 MPa and a tensile strength of at least 420 MPa, providing sufficient load-bearing capacity for typical building envelopes. Its mechanical properties meet the requirements of EN 10346, ensuring reliable performance under wind and snow loads.
Beyond strength, the zinc coating delivers essential corrosion protection. Manufacturers explicitly list roofing and cladding as primary applications for S350GD+Z, and it is commonly used in cold-formed purlins and roof decking profiles. The material also offers adequate ductility (elongation typically ≥16% for thicknesses above 0.7 mm) to allow roll-forming into trapezoidal or standing seam profiles without cracking.
For most industrial and commercial buildings, S350GD+Z provides a well-balanced combination of structural integrity, durability, and formability. However, for unusually long spans or severe corrosive environments, designers should verify coating weight (e.g., Z275) and consider higher-strength grades.
Just like you, 70% customers choose long-term cooperation with BBN steel not only for our good product and service quality, good reputation in the international market, but also for our experienced one-stop raw material supply and further steel processing!
