Top Grades
Home > Sellinglist - API 5L steel pipe,API 5L AChemical Composition,API 5L AMechanical Property

API 5L steel pipe,API 5L AChemical Composition,API 5L AMechanical Property steel plate

API 5L steel pipe
API 5L steel application:suitable for use in conveying gas, water, and oil in both the oil and natural gas industries.
API 5L AChemical Composition:


API 5L AChemical Composition

Grade

The Element Max (%)

C

Ti

Mn

P

S

API 5L A

0.22

-

0.90

0.030

0.030

API 5L AMechanical Property:


Grade

 

API 5L AMechanical Property

Thickness
mm

Yield

Tensile

Elongation

API 5L A

Min Mpa

Mpa

Min  %

 

207

331

a

The minimum elongation in 2 in. (50.8 mm) shall be that determined by the following equation:
U.S.Customary Unit Equation: e=625,000*A0.2/U0.9; SI Unit Equation: e=1,944A0.2/U0.9
Where e= minimum elongation in 2 in. (50.8 mm) in percent rounded to the nearest percent.
A= applicable tensile test specimen area, as follows:

For round bar specimens:

-----0.20 in.2(130 mm2) for the 0.500 in. and 0.350 in. specimens,
-----0.10 in.2(65 mm2) for the 0.250 in. specimen
b. For full section specimens, the smaller of (i) 0.75 in.2(485 mm2) and (ii) the cross-sectional area of the test specimen, calculated using the specified outside diameter of the pipe and the specified wall thickness of the pipe, rounded to the nearest 0.01 in.2(10 mm2);
c. For strip specimens, the smaller of (i) 0.75 in.2 (485 mm2) and (ii) the cross-sectional area of the test specimen, calculated using the specified width of the test specimen and the specified wall thickness of the pipe, rounded to the nearest 0.01 in.2 (10 mm2).
U= speciÞed minimum ultimate tensile strength in psi (MPa).
Should you need API 5L steel pipe, please visit our website:http://www.bebonchina.com/e-store.
or contact us by TEL:0086-371-86151827,0086-371-86151527
FAX: 0086-371-86011881
Oficina Dir: 2801 B# International enteprise center Zhengzhou city in China.
Post Code: 450001
E-mail: [email protected]
Thanks for your attention in advance.

Share
Are you also interested in further steel processing (machining)?

Just like you, 70% customers choose long-term cooperation with BBN steel not only for our good product and service quality, good reputation in the international market, but also for our experienced one-stop raw material supply and further steel processing!

Fabrication and Machining Service24h Technical support

Spot Resource