A537 Class 1 material refers to a grade of pressure vessel steel that is primarily used in the fabrication of boilers and pressure vessels for moderate and lower temperature service applications. Here are key points about A537 Class 1 material:
Standard: ASTM A537/A537M Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel.
Material Grade: A537 Class 1
Composition:
Carbon (C): Maximum of 0.24%
Manganese (Mn): 0.70-1.35%
Silicon (Si): 0.15-0.50%
Phosphorus (P): Maximum of 0.035%
Sulfur (S): Maximum of 0.035%
Heat Treatment:
A537 Class 1 material is typically supplied in the normalized condition. Normalizing involves heating the material to a specific temperature range followed by air cooling to obtain desired properties.
Mechanical Properties:
Tensile Strength: 485-620 MPa (70-90 ksi)
Yield Strength: 345 MPa (50 ksi) minimum
Elongation: 22% min. in 200 mm | 25% min. in 50 mm
Applications:
A537 Class 1 material is primarily used for welded pressure vessels where improved notch toughness is important.
Commonly utilized in the construction of boilers, storage tanks, and heat exchangers operating at moderate and lower temperatures.
Impact Testing:
A537 Class 1 steel is subjected to Charpy V-notch impact testing at specified temperatures to evaluate its fracture toughness characteristics.
Weldability:
A537 Class 1 exhibits good weldability characteristics, allowing for ease of fabrication and welding during the manufacturing process of pressure vessels.
Certification:
Material is certified to meet the requirements of ASTM A537/A537M specifications and may be subject to additional testing and quality control measures as per industry standards.
Supplier Information:
A537 Class 1 material is available from various steel suppliers and manufacturers who adhere to ASTM specifications and provide material certifications.
It is crucial to refer to the ASTM A537/A537M standard and consult with material suppliers or manufacturers for detailed specifications, testing requirements, and any additional information relevant to the use of A537 Class 1 material in pressure vessel applications.
Just like you, 70% customers choose long-term cooperation with BBN steel not only for our good product and service quality, good reputation in the international market, but also for our experienced one-stop raw material supply and further steel processing!
