Top Grades
Home > Sellinglist - How Does DX53D+Z Achieve Deep-Drawing Quality for Automotive Panels

How Does DX53D+Z Achieve Deep-Drawing Quality for Automotive Panels steel plate

DX53D+Z achieves deep-drawing quality through a combination of low-carbon chemistry, controlled mechanical properties, and a formable zinc coating. The steel’s chemical composition limits carbon to a maximum of 0.12% and manganese to 0.60%, minimizing hard phases and preserving ferrite ductility. This chemistry yields a yield strength of 140–260 MPa, tensile strength of 270–380 MPa, and elongation of at least 30%, providing the plasticity needed to stretch complex automotive panels without fracture. The "+Z" hot-dip zinc coating is applied to a substrate designed for forming, so the coating adheres during severe deformation. Research confirms DX53D+Z exhibits a higher forming limit than comparable automotive sheet steels in both uniaxial tension and biaxial bulging regions, directly supporting its use in door inner panels, outer panels, and oil pans where intricate shapes are required.

Share
Are you also interested in further steel processing (machining)?

Just like you, 70% customers choose long-term cooperation with BBN steel not only for our good product and service quality, good reputation in the international market, but also for our experienced one-stop raw material supply and further steel processing!

Fabrication and Machining Service24h Technical support

Spot Resource